| Worktable diameter | mm | Ø255 | ||
|---|---|---|---|---|
| Center bore diameter | mm | Ø140 | ||
| Through- hole diameter | mm | Ø100 | ||
| Height of table (horizontal) | mm | 210 | ||
| Height of center (vertical) | mm | 190 | ||
| Width of T-slot | mm | 12H7 | ||
| Width of guide block | mm | 18 | ||
| Drive pressure / method | MPa | 5/Pneumatic | ||
| Clamping torque | N.m | 900 | ||
| Servo motor type | Fanuc | α8i | ||
| Mitsubishi | HF-154 | |||
| Transmission ratio | 1 / 120 | |||
| Max. table speed | min-1 | 22.2 | ||
| Allowable loading inertia |  |
Kg.m2 | 3.25 | |
| Resolution | deg. | 0.001 | ||
| Indexing accuracy | sec. | 15 | ||
| Repeatability | sec. | 6 | ||
| Net weight (servo motor excluded) | Kg | 111 | ||
| Allowable loading capacity | Vertical | Kg | 200 | |
| Horizontal | Kg | 400 | ||
| Allowable load (when table clamped) | F |  |
N | |
| FXL |  |
N.m | ||
| FXL |  |
N.m | ||
| Allowable wheel torque |  |
N.m | 550 |
