| Worktable diameter | mm | Ø320 | ||
|---|---|---|---|---|
| Center bore diameter | mm | Ø180 | ||
| Through- hole diameter | mm | Ø140 | ||
| Height of table (horizontal) | mm | 235 | ||
| Height of center (vertical) | mm | 210 | ||
| Width of T-slot | mm | 14H7 | ||
| Width of guide block | mm | 18 | ||
| Drive pressure / method | MPa | 5/Pneumatic | ||
| Clamping torque | N.m | 1600 | ||
| Servo motor type | Fanuc | α12i | ||
| Mitsubishi | HF-204 | |||
| Transmission ratio | 1 / 120 | |||
| Max. table speed | min-1 | 22.2 | ||
| Allowable loading inertia |  |
Kg.m2 | 6.4 | |
| Resolution | deg. | 0.001 | ||
| Indexing accuracy | sec. | 15 | ||
| Repeatability | sec. | 6 | ||
| Net weight (servo motor excluded) | Kg | 148 | ||
| Allowable loading capacity | Vertical | Kg | 250 | |
| Horizontal | Kg | 500 | ||
| Allowable load (when table clamped) | F |  |
N | |
| FXL |  |
N.m | ||
| FXL |  |
N.m | ||
| Allowable wheel torque |  |
N.m | 780 |
